Alsa e Gambas: Invio dati con l'uso delle Strutture
Da Gambas-it.org - Wikipedia.
Versione del 4 feb 2022 alle 09:27 di Vuott (Discussione | contributi)
Indice
Preambolo
In questa pagina verrà preso in considerazione l'uso delle Strutture per l'invio degli Eventi Midi ad ALSA.
Le Strutture, introdotte in Gambas con la versione 3.0, possono essere utilizzate per scrivere e gestire i messaggi Midi. Infatti dichiarando una Struttura (Struct) ci si riserva una quantità di memoria, definita dal tipo (byte, short, integer, etc.) dei valori dichiarati in ciascun membro della Struttura.
Dichiarando poi una variabile del tipo di quella Struttura, si ha automaticamente una zona di memoria utilizzabile.
Scrittura dei dati dei messaggi Midi nelle Strutture
Inseriremo una Struttura modello all'inizio della classe secondaria CAlsa.class. Porremo quindi, quali campi della struttura-tipo, i dati necessari per la definizione degli eventi Midi, come richiesti da ALSA, attribuendo a ciascun campo il tipo di dato desiderato da ALSA nel rispetto dell'ordine previsto dei dati, nonché del numero del byte al quale ciascun dato dovrà essere assegnato. Inseriremo non solo i dati comuni per tutti i messaggi Midi, ma anche quelli previsti per gli specifici messaggi:
In rosso sono rappresentati i membri che contengono dati identici per qualunque Evento Midi ALSA;
In verde sono rappresentati i membri che contengono dati relativi allo specifico Evento Midi ALSA.
struct snd_seq_event_t { Public Struct Snd_seq_event_t
snd_seq_event_type_t type type As Byte byte di indice 0
unsigned char flags flags As Byte
unsigned char tag tag As Byte
unsigned char queue queue As Byte
snd_seq_timestamp_t time
↳ snd_seq_tick_time_t / snd_seq_real_time_t
↳ tick ↳ tv_sec tick_o_tv_sec As Integer
↳ tv_nsec tv_nsec As Integer
snd_seq_addr_t source
↳ unsigned char client source_client As Byte
↳ unsigned char port source_port As Byte
snd_seq_addr_t dest
↳ unsigned char client dest_client As Byte
↳ unsigned char port dest_port As Byte
snd_seq_ev_note_t note
↳ unsigned char channel channel As Byte byte di indice 16
↳ unsigned char note note As Byte byte di indice 17
↳ unsigned char velocity velocity As Byte byte di indice 18
↳ unsigned char off_velocity off_velocity As Byte byte di indice 19
unsigned int param param As Integer byte di indice 20
signed int value value As Integer byte di indice 24
} End Struct
I dati appartenenti agli specifici Messaggi Midi non vengono utilizzati tutti insieme da ciascun Evento Midi ALSA, ma solo alcuni di essi a seconda dello specifico Messaggio. Ovviamente nella Struttura-tipo essi saranno comunque posti e dichiarati, al fine di consentirne l'uso.
In Gambas si istanzierà una variabile del tipo della Struttura snd_seq_event_t, sopra descritta, con la quale gestire gli specifici Eventi Midi di ALSA, assegnando a ciascun membro (sia quelli comuni, sia quelli specifici di ogni tipo di Evento Midi ALSA) il relativo valore. Ovviamente si potrà evitare di richiamare i membri che eventualmente non devono essere lasciati con valore zero.
Riassunto delle fasi di creazione, allocamento e invio degli Eventi Midi ad ALSA
Prima di mostrare dei codici esemplificativi sulle varie modalità di invio degli'Eventi Midi al sistema ALSA, è opportuno ricordare quanto descritto nela capitolo precedente "ALSA e Gambas - Gestione dei Messaggi Midi standard".
Dunque possiamo elencare per sommicapi le seguenti fasi da seguire:
1) comporre l'Evento Midi ALSA nei membri essenziali della sua Struttura snd_seq_event_t, ed in particolare attribuire la temporizzazione mediante il "Timestamp" in "tick Midi" o in "real time";
2) allocare la Coda degli Eventi Midi ALSA con la funzione esterna snd_seq_alloc_queue();
3) avviare il controllo della Coda degli Eventi Midi ALSA con la funzione esterna snd_seq_control_queue(seq, q, type, value, 0, ev), passandole come 3° argomento la Costante di ALSA "SND_SEQ_EVENT_START";
4) accodare gli Eventi Midi nel buffer mediante la funzione esterna snd_seq_event_output_buffer();
5) inviare al sistema ALSA mediante la funzione esterna snd_seq_drain_output() l'intera Coda degli Eventi Midi, memorizzati nel buffer, affinche siano processati;
6) arrestare la Coda degli Eventi Midi ALSA richiamando la funzione esterna snd_seq_control_queue(seq, q, type, value, 0, ev), passandole però questa volta come suo 3° argomento la Costante di ALSA "SND_SEQ_EVENT_STOP".
Esempi di codice
1° esempio pratico
Nel seguente esempio in ambiente grafico avremo la Classe principale "FMain.Class" e una Classe secondaria, che incapsula le risorse di ALSA da utilizzare.
Dichiareremo una Struttura, chiamata snd_seq_event_t, che farà da modello alla particolare variabile di quel tipo di Struttura da usare per la organizzazione di ciascun Evento Midi ALSA.
In questo esempio sarà effettuato un invio diretto e immediato di un singolo Evento Midi per volta: cliccando su un qualunque tasto della tastiera del computer, si invierà un Evento Midi "NoteON"; rilasciando il tasto si invierà un Evento Midi "NoteOFF", per far cesssare l'esecuzione della nota Midi prima avviata.
Saranno gestiti comunque in apertura del programma anche gli Eventi Midi "Control Change" e "Program Change".
Riguardo al Timestamp di ogni Evento Midi ALSA inviato, trattandosi di invio singolo e diretto con esecuzione immediata è indifferente la modalità scelta: il membro time della predetta Struttura snd_seq_event_t relativo al Timestamp del singolo Evento Midi sarà posto a zero.
Dunque avremo la Classe principale "FMain.Class":
Private Const id_dev As Integer = 128 ' 14 = midi out oppure 128 (solitamente) = softsynth
Private Const p_dev As Integer = 0 ' porta del Client destinatario dei dati Midi: solitamente 0
Public alsa As CAlsa ' Classe che incapsula le funzioni ALSA
Private bo As Boolean
Public Sub Form_Open()
' Crea ("istanzia") un Oggetto della Classe "CAlsa" per poterla usare:
With alsa = New CAlsa As "Alsa"
' Apre ALSA e assegna un nome al Client:
Me.Title = "|| Client ALSA " & .AlsaIni("Programma di prova")
' Sceglie la periferica (Softsynth) su cui suonare:
.ImpostaDispositivo(id_dev, p_dev)
End With
' Imposta il Volume gestendo l'Evento Midi "Control Change":
alsa.ControlChange(0, 7, 64)
' Imposta il suono dello strumento musicale gestendo l'Evento Midi "Program Change":
alsa.ProgramChange(0, 0, 44)
End
Public Sub Form_KeyPress()
If bo Then Return
' Imposta la nota midi da eseguire gestendo l'Evento Midi "Note-ON":
alsa.NoteON(0, 64, 100)
alsa.Flush()
bo = True
End
Public Sub Form_KeyRelease()
' Imposta la nota midi da eseguire gestendo l'Evento Midi "Note-OFF":
alsa.NoteOFF(0, 64, 0)
alsa.Flush()
bo = False
End
Public Sub Form_Close()
alsa.Chiude()
End
Nella Classe secondaria, chiamata "CAlsa", avremo il seguente codice:
Private handle As Pointer
Private id As Integer
Private s_port As Integer
Private que As Integer
Private dclient As Byte
Private dport As Byte
Library "libasound:2.0.0"
Public Struct snd_seq_event_t
type As Byte
flags As Byte
tag As Byte
queue As Byte
tick_o_tv_sec As Integer
tv_nsec As Integer
source_client As Byte
source_port As Byte
dest_client As Byte
dest_port As Byte
channel As Byte
note As Byte
velocity As Byte
off_velocity As Byte
param As Integer
value As Integer
End Struct
Private Const SND_SEQ_OPEN_OUTPUT As Integer = 1
Private Const SND_SEQ_PORT_CAP_READ As Integer = 1
Private Const SND_SEQ_PORT_TYPE_MIDI_GENERIC As Integer = 2
Private Const SND_SEQ_PORT_TYPE_APPLICATION As Integer = 1048576
Private Enum SND_SEQ_EVENT_NOTEON = 6, SND_SEQ_EVENT_NOTEOFF, SND_SEQ_EVENT_KEYPRESS,
SND_SEQ_EVENT_CONTROLLER = 10, SND_SEQ_EVENT_PGMCHANGE, SND_SEQ_EVENT_CHANPRESS, SND_SEQ_EVENT_PITCHBEND
' int snd_seq_open (snd_seq_t **seqp, const char * name, int streams, int mode)
' Open the ALSA sequencer.
Private Extern snd_seq_open(seqp As Pointer, name As String, streams As Integer, mode As Integer) As Integer
' int snd_seq_set_client_name (snd_seq_t* seq, const char* name)
' Set client name.
Private Extern snd_seq_set_client_name(seq As Pointer, name As String) As Integer
' int snd_seq_client_id (snd_seq_t * seq)
' Get the client id.
Private Extern snd_seq_client_id(seq As Pointer) As Integer
' int snd_seq_create_simple_port (snd_seq_t* seq, const char* name, unsigned int caps, unsigned int type)
' Creates a port with the given capability and type bits.
Private Extern snd_seq_create_simple_port(seq As Pointer, name As String, caps As Integer, type As Integer) As Integer
' int snd_seq_alloc_queue (snd_seq_t * seq)
' Allocate a queue.
Private Extern snd_seq_alloc_queue(seq As Pointer) As Integer
' int snd_seq_event_output_buffer (snd_seq_t * seq, snd_seq_event_t *ev)
' Output an event.
Private Extern snd_seq_event_output_buffer(seq As Pointer, ev As Snd_seq_event_t) As Integer
' int snd_seq_drain_output (snd_seq_t * seq)
' Drain output buffer to sequencer.
Private Extern snd_seq_drain_output(seq As Pointer) As Integer
' const char * snd_strerror (int errnum)
' Returns the message for an error code.
Private Extern snd_strerror(errnum As Integer) As String
' int snd_seq_close (snd_seq_t * seq)
' Close the sequencer.
Private Extern snd_seq_close(seq As Pointer) As Integer
Public Function AlsaIni(nome As String) As String
Dim err As Integer
err = snd_seq_open(VarPtr(handle), "default", SND_SEQ_OPEN_OUTPUT, 0)
Print "Apertura del subsistema 'seq' di ALSA = "; IIf(err == 0, "corretta !", "errata !")
If err < 0 Then error.RAISE("Errore: " & snd_strerror(err))
snd_seq_set_client_name(handle, nome)
id = snd_seq_client_id(handle)
Print "Alsa ClientID = "; id
s_port = snd_seq_create_simple_port(handle, "Uscita", SND_SEQ_PORT_CAP_READ, SND_SEQ_PORT_TYPE_MIDI_GENERIC + SND_SEQ_PORT_TYPE_APPLICATION)
Print "Porta del programma = "; s_port
If s_port < 0 Then error.Raise("Errore: " & snd_strerror(s_port))
que = snd_seq_alloc_queue(handle)
If que < 0 Then error.Raise("Errore: " & snd_strerror(que))
Return CStr(id) & ":" & CStr(s_port)
End
Public Procedure ImpostaDispositivo(client As Integer, port As Integer)
dclient = client
dport = port
End
Public Procedure ControlChange(canale As Byte, prm As Integer, value As Integer)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_CONTROLLER
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.param = prm
.value = value
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure ProgramChange(canale As Byte, non_usato As Byte, value As Integer)
Dim err As Integer
Dim ev_midi As New Snd_seq_event_t
With ev_midi
.type = SND_SEQ_EVENT_PGMCHANGE
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.value = value
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure NoteON(canale As Byte, nota As Byte, vel As Byte)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_NOTEON
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.note = nota
.velocity = vel
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure NoteOFF(canale As Byte, nota As Byte, vel As Byte)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_NOTEOFF
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.note = nota
.velocity = vel
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure Flush()
Dim err As Integer
err = snd_seq_drain_output(handle)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure Chiude()
snd_seq_close(handle)
End
2° esempio pratico
Di seguito un programma simile al precedente, nel quale si farà uso di uno Slider per agire sul Messaggio Midi Pitch Bend.
Nella Classe principale avremo il seguente codice:
Private Const id_dev As Integer = 128 ' 14 = midi out oppure 128 (solitamente) = softsynth
Private Const p_dev As Integer = 0 ' porta del Client destinatario dei dati Midi: solitamente 0
Public alsa As CAlsa ' Classe che incapsula le funzioni ALSA
Private bo As Boolean
Public Sub Form_Open()
With Slider1
.MinValue = -8192
.MaxValue = 8192
End With
' Crea ("istanzia") un Oggetto della Classe "CAlsa" per poterla usare:
With alsa = New CAlsa As "Alsa"
' Apre ALSA e assegna un nome al Client:
Me.Title = "|| Client ALSA " & .AlsaIni("Programma di prova")
' Sceglie la periferica (Softsynth) su cui suonare:
.ImpostaDispositivo(id_dev, p_dev)
End With
' Imposta il Volume gestendo l'Evento Midi "Control Change":
alsa.ControlChange(0, 7, 64)
' Imposta il suono dello strumento musicale gestendo l'Evento Midi "Program Change":
alsa.ProgramChange(0, 0, 44)
End
Public Sub Form_KeyPress()
If bo Then Return
' Imposta la nota midi da eseguire gestendo l'Evento Midi "Note-ON":
alsa.NoteON(0, 64, 100)
alsa.Flush()
bo = True
End
Public Sub Form_KeyRelease()
' Imposta la nota midi da eseguire gestendo l'Evento Midi "Note-OFF":
alsa.NoteOFF(0, 64, 0)
alsa.Flush()
bo = False
End
Public Sub Slider1_Change()
alsa.PitchBend(0, 0, Slider1.Value)
alsa.Flush()
End
Public Sub Form_Close()
alsa.Chiude()
End
Nella Classe secondaria, chiamata "CAlsa", avremo il seguente codice:
Private handle As Pointer
Private id As Integer
Private s_port As Integer
Private que As Integer
Private dclient As Byte
Private dport As Byte
Library "libasound:2.0.0"
Public Struct snd_seq_event_t
type As Byte
flags As Byte
tag As Byte
queue As Byte
tick_o_tv_sec As Integer
tv_nsec As Integer
source_client As Byte
source_port As Byte
dest_client As Byte
dest_port As Byte
channel As Byte
note As Byte
velocity As Byte
off_velocity As Byte
param As Integer
value As Integer
End Struct
Private Const SND_SEQ_OPEN_OUTPUT As Integer = 1
Private Const SND_SEQ_PORT_CAP_READ As Integer = 1
Private Const SND_SEQ_PORT_TYPE_MIDI_GENERIC As Integer = 2
Private Const SND_SEQ_PORT_TYPE_APPLICATION As Integer = 1048576
Private Enum SND_SEQ_EVENT_NOTEON = 6, SND_SEQ_EVENT_NOTEOFF, SND_SEQ_EVENT_KEYPRESS,
SND_SEQ_EVENT_CONTROLLER = 10, SND_SEQ_EVENT_PGMCHANGE, SND_SEQ_EVENT_CHANPRESS, SND_SEQ_EVENT_PITCHBEND
' int snd_seq_open (snd_seq_t **seqp, const char * name, int streams, int mode)
' Open the ALSA sequencer.
Private Extern snd_seq_open(seqp As Pointer, name As String, streams As Integer, mode As Integer) As Integer
' int snd_seq_set_client_name (snd_seq_t* seq, const char* name)
' Set client name.
Private Extern snd_seq_set_client_name(seq As Pointer, name As String) As Integer
' int snd_seq_client_id (snd_seq_t * seq)
' Get the client id.
Private Extern snd_seq_client_id(seq As Pointer) As Integer
' int snd_seq_create_simple_port (snd_seq_t* seq, const char* name, unsigned int caps, unsigned int type)
' Creates a port with the given capability and type bits.
Private Extern snd_seq_create_simple_port(seq As Pointer, name As String, caps As Integer, type As Integer) As Integer
' int snd_seq_alloc_queue (snd_seq_t * seq)
' Allocate a queue.
Private Extern snd_seq_alloc_queue(seq As Pointer) As Integer
' int snd_seq_event_output_buffer (snd_seq_t * seq, snd_seq_event_t *ev)
' Output an event.
Private Extern snd_seq_event_output_buffer(seq As Pointer, ev As Snd_seq_event_t) As Integer
' int snd_seq_drain_output (snd_seq_t * seq)
' Drain output buffer to sequencer.
Private Extern snd_seq_drain_output(seq As Pointer) As Integer
' const char * snd_strerror (int errnum)
' Returns the message for an error code.
Private Extern snd_strerror(errnum As Integer) As String
' int snd_seq_close (snd_seq_t * seq)
' Close the sequencer.
Private Extern snd_seq_close(seq As Pointer) As Integer
Public Function AlsaIni(nome As String) As String
Dim err As Integer
err = snd_seq_open(VarPtr(handle), "default", SND_SEQ_OPEN_OUTPUT, 0)
Print "Apertura del subsistema 'seq' di ALSA = "; IIf(err == 0, "corretta !", "errata !")
If err < 0 Then error.RAISE("Errore: " & snd_strerror(err))
snd_seq_set_client_name(handle, nome)
id = snd_seq_client_id(handle)
Print "Alsa ClientID = "; id
s_port = snd_seq_create_simple_port(handle, "Uscita", SND_SEQ_PORT_CAP_READ, SND_SEQ_PORT_TYPE_MIDI_GENERIC + SND_SEQ_PORT_TYPE_APPLICATION)
Print "Porta del programma = "; s_port
If s_port < 0 Then error.Raise("Errore: " & snd_strerror(s_port))
que = snd_seq_alloc_queue(handle)
If que < 0 Then error.Raise("Errore: " & snd_strerror(que))
Return CStr(id) & ":" & CStr(s_port)
End
Public Procedure ImpostaDispositivo(client As Integer, port As Integer)
dclient = client
dport = port
End
Public Procedure ControlChange(canale As Byte, prm As Integer, value As Integer)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_CONTROLLER
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.param = prm
.value = value
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure ProgramChange(canale As Byte, non_usato As Byte, value As Integer)
Dim err As Integer
Dim ev_midi As New Snd_seq_event_t
With ev_midi
.type = SND_SEQ_EVENT_PGMCHANGE
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.value = value
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure NoteON(canale As Byte, nota As Byte, vel As Byte)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_NOTEON
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.note = nota
.velocity = vel
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure NoteOFF(canale As Byte, nota As Byte, vel As Byte)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_NOTEOFF
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.note = nota
.velocity = vel
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure Flush()
Dim err As Integer
err = snd_seq_drain_output(handle)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure PitchBend(canale As Byte, prm As Integer, val As Integer)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_PITCHBEND
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.param = prm
.value = val
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure Stop()
snd_seq_close(handle)
End
Esempi con invio di più Eventi Midi ALSA temporizzati in sequenza
Vedremo di seguito due semplici esempi sull'uso del membro flags della Struttura snd_seq_event_t e della temporizzazione in "tick time" e in "real time".
Invio Eventi Midi con temporizzazione in "tick time"
Ricordiamo che la temporizzazione in ALSA nella modalità in "tick" Midi è attivata assegnando al membro flags della snd_seq_event_t la Costante "SND_SEQ_TIME_STAMP_TICK" di ALSA, mentre i valori temporali sono espressi appunto in "tick" Midi al membro tick del membro snd_seq_timestamp_t time della predetta Struttura.
Mostriamo un esempio pratico in ambiente grafico, nel quale cliccando su un "ToggleButton" si avvierà l'invio ad ALSA degli Eventi Midi e il loro processamento. Essi saranno eseguiti secondo la propria temporizzazione impostata nella Struttura snd_seq_event_t costitutiva.
Dunque avremo la Classe principale "FMain.Class":
Private Const id_dev As Integer = 128 ' 14 = midi out oppure 128 (solitamente) = softsynth
Private Const p_dev As Integer = 0 ' porta del Client destinatario dei dati Midi: solitamente 0
Public alsa As CAlsa ' Classe che incapsula le funzioni ALSA
Public Sub Form_Open()
' Crea ("istanzia") un Oggetto della Classe "CAlsa" per poterla usare:
With alsa = New CAlsa As "Alsa"
' Apre ALSA e assegna un nome al Client:
Me.Title = "|| Client ALSA " & .AlsaIni("Programma di prova")
' Sceglie la periferica (Softsynth) su cui suonare:
.ImpostaDispositivo(id_dev, p_dev)
End With
End
Public Sub ToggleButton1_Click()
If ToggleButton1.Value Then
With alsa
' Avvia la "Coda" degli Eventi Midi ALSA:
.AvvioCoda()
' Imposta il Volume gestendo l'Evento Midi "Control Change":
.ControlChange(0, 0, 0, 7, 50)
' Imposta il suono dello strumento musicale gestendo l'Evento Midi "Program Change":
.ProgramChange(0, 0, 0, 0, 44)
' Imposta la prima nota Midi da eseguire:
.NoteON(0, 0, 0, 64, 100)
' Imposta la nota Midi da silenziare dopo 96 tick dall'inizio della "Coda":
.NoteOFF(0, 96, 0, 64, 0)
' Imposta il suono di un altro strumento musicale dopo 150 tick dall'inizio della "Coda" (quindi crea una pausa):
.ProgramChange(0, 182, 0, 0, 18)
' Imposta la nota Midi da eseguire dopo 182 tick dall'inizio della "Coda":
.NoteON(0, 182, 0, 66, 100)
' Imposta la nota Midi da silenziare dopo 300 tick dall'inizio della "Coda":
.NoteOFF(0, 300, 0, 66, 0)
' Imposta il suono di un altro strumento musicale dopo 300 tick dall'inizio della "Coda":
.ProgramChange(0, 300, 0, 0, 18)
' Imposta la nota Midi da eseguire dopo 300 tick dall'inizio della "Coda":
.NoteON(0, 300, 0, 68, 100)
' Imposta la nota Midi da silenziare dopo 500 tick dall'inizio della "Coda":
.NoteOFF(0, 500, 0, 68, 0)
' Dispone infine l'invio di tutti gli Eventi Midi bufferizzati nella "Coda":
.Flush()
End With
Else
alsa.StopCoda()
Me.Close
Endif
End
Nella Classe secondaria, chiamata "CAlsa", vi sarà invece il seguente codice:
Private handle As Pointer
Private id As Integer
Private s_port As Integer
Private que As Integer
Private dclient As Byte
Private dport As Byte
Library "libasound:2.0.0"
Public Struct snd_seq_event_t
type As Byte
flags As Byte
tag As Byte
queue As Byte
tick_o_tv_sec As Integer
tv_nsec As Integer
source_client As Byte
source_port As Byte
dest_client As Byte
dest_port As Byte
channel As Byte
note As Byte
velocity As Byte
off_velocity As Byte
param As Integer
value As Integer
End Struct
Private Const SND_SEQ_OPEN_OUTPUT As Integer = 1
Private Const SND_SEQ_PORT_CAP_READ As Integer = 1
Private Const SND_SEQ_PORT_TYPE_MIDI_GENERIC As Integer = 2
Private Const SND_SEQ_PORT_TYPE_APPLICATION As Integer = 1048576
Private Enum SND_SEQ_EVENT_NOTEON = 6, SND_SEQ_EVENT_NOTEOFF, SND_SEQ_EVENT_KEYPRESS,
SND_SEQ_EVENT_CONTROLLER = 10, SND_SEQ_EVENT_PGMCHANGE, SND_SEQ_EVENT_CHANPRESS,
SND_SEQ_EVENT_PITCHBEND, SND_SEQ_EVENT_START = 30, SND_SEQ_EVENT_STOP = 32
' int snd_seq_open (snd_seq_t **seqp, const char * name, int streams, int mode)
' Open the ALSA sequencer.
Private Extern snd_seq_open(seqp As Pointer, name As String, streams As Integer, mode As Integer) As Integer
' int snd_seq_set_client_name (snd_seq_t* seq, const char* name)
' Set client name.
Private Extern snd_seq_set_client_name(seq As Pointer, name As String) As Integer
' int snd_seq_client_id (snd_seq_t * seq)
' Get the client id.
Private Extern snd_seq_client_id(seq As Pointer) As Integer
' int snd_seq_create_simple_port (snd_seq_t* seq, const char* name, unsigned int caps, unsigned int type)
' Creates a port with the given capability and type bits.
Private Extern snd_seq_create_simple_port(seq As Pointer, name As String, caps As Integer, type As Integer) As Integer
' int snd_seq_alloc_queue (snd_seq_t * seq)
' Allocate a queue.
Private Extern snd_seq_alloc_queue(seq As Pointer) As Integer
' int snd_seq_control_queue(snd_seq_t * seq, int q, int type, int value, snd_seq_event_t * ev)
' Queue controls - start/stop/continue.
Private Extern snd_seq_control_queue(seq As Pointer, q As Integer, type As Integer, value As Integer, ev As Pointer) As Integer
' int snd_seq_event_output_buffer (snd_seq_t * seq, snd_seq_event_t *ev)
' Output an event.
Private Extern snd_seq_event_output_buffer(seq As Pointer, ev As Snd_seq_event_t) As Integer
' int snd_seq_drain_output (snd_seq_t * seq)
' Drain output buffer to sequencer.
Private Extern snd_seq_drain_output(seq As Pointer) As Integer
' const char * snd_strerror (int errnum)
' Returns the message for an error code.
Private Extern snd_strerror(errnum As Integer) As String
' int snd_seq_close (snd_seq_t * seq)
' Close the sequencer.
Private Extern snd_seq_close(seq As Pointer) As Integer
Public Function AlsaIni(nome As String) As String
Dim err As Integer
err = snd_seq_open(VarPtr(handle), "default", SND_SEQ_OPEN_OUTPUT, 0)
Print "Apertura del subsistema 'seq' di ALSA = "; IIf(err == 0, "corretta !", "errata !")
If err < 0 Then error.RAISE("Errore: " & snd_strerror(err))
snd_seq_set_client_name(handle, nome)
id = snd_seq_client_id(handle)
Print "Alsa ClientID = "; id
s_port = snd_seq_create_simple_port(handle, "Uscita", SND_SEQ_PORT_CAP_READ, SND_SEQ_PORT_TYPE_MIDI_GENERIC + SND_SEQ_PORT_TYPE_APPLICATION)
Print "Porta del programma = "; s_port
If s_port < 0 Then error.Raise("Errore: " & snd_strerror(s_port))
que = snd_seq_alloc_queue(handle)
If que < 0 Then error.Raise("Errore: " & snd_strerror(que))
Return CStr(id) & ":" & CStr(s_port)
End
Public Procedure ImpostaDispositivo(client As Integer, port As Integer)
dclient = client
dport = port
End
Public Procedure AvvioCoda()
Dim err As Integer
err = snd_seq_control_queue(handle, que, SND_SEQ_EVENT_START, 0, 0)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure ControlChange(flg As Byte, tick As Integer, canale As Byte, prm As Integer, value As Integer)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_CONTROLLER
.flags = flg
.tick_o_tv_sec = tick
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.param = prm
.value = value
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure ProgramChange(flg As Byte, tick As Integer, canale As Byte, non_usato As Byte, value As Integer)
Dim err As Integer
Dim ev_midi As New Snd_seq_event_t
With ev_midi
.type = SND_SEQ_EVENT_PGMCHANGE
.flags = flg
.tick_o_tv_sec = tick
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.value = value
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure NoteON(flg As Byte, tick As Integer, canale As Byte, nota As Byte, vel As Byte)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_NOTEON
.flags = flg
.tick_o_tv_sec = tick
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.note = nota
.velocity = vel
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure NoteOFF(flg As Byte, tick As Integer, canale As Byte, nota As Byte, vel As Byte)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_NOTEOFF
.flags = flg
.tick_o_tv_sec = tick
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.note = nota
.velocity = vel
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure Flush()
Dim err As Integer
err = snd_seq_drain_output(handle)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure StopCoda()
Dim err As Integer
err = snd_seq_control_queue(handle, que, SND_SEQ_EVENT_STOP, 0, 0)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
snd_seq_close(handle)
End
Invio Eventi Midi con temporizzazione in "real time"
La temporizzazione in ALSA nella modalità in "real time" (temporizzazione in formato orario) è attivata assegnando al membro flags della snd_seq_event_t la Costante "SND_SEQ_TIME_STAMP_REAL" di ALSA.
Ricordiamo che questa modalità di temporizzazione degli Eventi Midi di ALSA adotta il sistema di misura dell'orario standard (ore, minuti, secondi), assegnando il valore in "secondi" al membro tv_sec e in "nanosecondi" al membro tv_nsec della sotto-Struttura snd_seq_real_time_t del membro time della Struttura principale snd_seq_event_t costitutiva.
Mostriamo un esempio identico al precedente, ma con impostazione della temporizzazione in Clock Midi in secondi:
Dunque avremo la Classe principale "FMain.Class":
Private Const id_dev As Integer = 128 ' 14 = midi out oppure 128 (solitamente) = softsynth
Private Const p_dev As Integer = 0 ' porta del Client destinatario dei dati Midi: solitamente 0
Public alsa As CAlsa ' Classe che incapsula le funzioni ALSA
Public Sub Form_Open()
' Crea ("istanzia") un Oggetto della Classe "CAlsa" per poterla usare:
With alsa = New CAlsa As "Alsa"
' Apre ALSA e assegna un nome al Client:
Me.Title = "|| Client ALSA " & .AlsaIni("Programma di prova")
' Sceglie la periferica (Softsynth) su cui suonare:
.ImpostaDispositivo(id_dev, p_dev)
End With
End
Public Sub ToggleButton1_Click()
If ToggleButton1.Value Then
With alsa
' Avvia la "Coda" degli Eventi Midi ALSA:
.AvvioCoda()
' Imposta il Volume gestendo l'Evento Midi "Control Change":
.ControlChange(1, 0, 0, 7, 50)
' Imposta il suono dello strumento musicale gestendo l'Evento Midi "Program Change":
.ProgramChange(1, 0, 0, 0, 44)
' Imposta la prima nota Midi da eseguire:
.NoteON(1, 0, 0, 64, 100)
' Imposta la nota Midi da silenziare dopo 1 secondo dall'inizio della "Coda":
.NoteOFF(1, 1, 0, 64, 0)
' Imposta il suono di un altro strumento musicale dopo 2 secondi dall'inizio della "Coda" (quindi crea una pausa):
.ProgramChange(1, 2, 0, 0, 18)
' Imposta la nota Midi da eseguire dopo 2 secondi dall'inizio della "Coda":
.NoteON(1, 2, 0, 66, 100)
' Imposta la nota Midi da silenziare dopo 3 secondi dall'inizio della "Coda":
.NoteOFF(1, 3, 0, 66, 0)
' Imposta il suono di un altro strumento musicale dopo 3 secondi dall'inizio della "Coda":
.ProgramChange(1, 3, 0, 0, 18)
' Imposta la nota Midi da eseguire dopo 3 secondi dall'inizio della "Coda":
.NoteON(1, 3, 0, 68, 100)
' Imposta la nota Midi da silenziare dopo 5 secondi dall'inizio della "Coda":
.NoteOFF(1, 5, 0, 68, 0)
' Dispone infine l'invio di tutti gli Eventi Midi bufferizzati nella "Coda":
.Flush()
End With
Else
alsa.StopCoda()
Me.Close
Endif
End
Nella Classe secondaria, chiamata "CAlsa", vi sarà invece il seguente codice:
Private handle As Pointer
Private id As Integer
Private s_port As Integer
Private que As Integer
Private dclient As Byte
Private dport As Byte
Library "libasound:2.0.0"
Public Struct snd_seq_event_t
type As Byte
flags As Byte
tag As Byte
queue As Byte
tick_o_tv_sec As Integer
tv_nsec As Integer
source_client As Byte
source_port As Byte
dest_client As Byte
dest_port As Byte
channel As Byte
note As Byte
velocity As Byte
off_velocity As Byte
param As Integer
value As Integer
End Struct
Private Const SND_SEQ_OPEN_OUTPUT As Integer = 1
Private Const SND_SEQ_PORT_CAP_READ As Integer = 1
Private Const SND_SEQ_PORT_TYPE_MIDI_GENERIC As Integer = 2
Private Const SND_SEQ_PORT_TYPE_APPLICATION As Integer = 1048576
Private Enum SND_SEQ_EVENT_NOTEON = 6, SND_SEQ_EVENT_NOTEOFF, SND_SEQ_EVENT_KEYPRESS,
SND_SEQ_EVENT_CONTROLLER = 10, SND_SEQ_EVENT_PGMCHANGE, SND_SEQ_EVENT_CHANPRESS,
SND_SEQ_EVENT_PITCHBEND, SND_SEQ_EVENT_START = 30, SND_SEQ_EVENT_STOP = 32
' int snd_seq_open (snd_seq_t **seqp, const char * name, int streams, int mode)
' Open the ALSA sequencer.
Private Extern snd_seq_open(seqp As Pointer, name As String, streams As Integer, mode As Integer) As Integer
' int snd_seq_set_client_name (snd_seq_t* seq, const char* name)
' Set client name.
Private Extern snd_seq_set_client_name(seq As Pointer, name As String) As Integer
' int snd_seq_client_id (snd_seq_t * seq)
' Get the client id.
Private Extern snd_seq_client_id(seq As Pointer) As Integer
' int snd_seq_create_simple_port (snd_seq_t* seq, const char* name, unsigned int caps, unsigned int type)
' Creates a port with the given capability and type bits.
Private Extern snd_seq_create_simple_port(seq As Pointer, name As String, caps As Integer, type As Integer) As Integer
' int snd_seq_alloc_queue (snd_seq_t * seq)
' Allocate a queue.
Private Extern snd_seq_alloc_queue(seq As Pointer) As Integer
' int snd_seq_control_queue(snd_seq_t * seq, int q, int type, int value, snd_seq_event_t * ev)
' Queue controls - start/stop/continue.
Private Extern snd_seq_control_queue(seq As Pointer, q As Integer, type As Integer, value As Integer, ev As Pointer) As Integer
' int snd_seq_event_output_buffer (snd_seq_t * seq, snd_seq_event_t *ev)
' Output an event.
Private Extern snd_seq_event_output_buffer(seq As Pointer, ev As Snd_seq_event_t) As Integer
' int snd_seq_drain_output (snd_seq_t * seq)
' Drain output buffer to sequencer.
Private Extern snd_seq_drain_output(seq As Pointer) As Integer
' const char * snd_strerror (int errnum)
' Returns the message for an error code.
Private Extern snd_strerror(errnum As Integer) As String
' int snd_seq_close (snd_seq_t * seq)
' Close the sequencer.
Private Extern snd_seq_close(seq As Pointer) As Integer
Public Function AlsaIni(nome As String) As String
Dim err As Integer
err = snd_seq_open(VarPtr(handle), "default", SND_SEQ_OPEN_OUTPUT, 0)
Print "Apertura del subsistema 'seq' di ALSA = "; IIf(err == 0, "corretta !", "errata !")
If err < 0 Then error.RAISE("Errore: " & snd_strerror(err))
snd_seq_set_client_name(handle, nome)
id = snd_seq_client_id(handle)
Print "Alsa ClientID = "; id
s_port = snd_seq_create_simple_port(handle, "Uscita", SND_SEQ_PORT_CAP_READ, SND_SEQ_PORT_TYPE_MIDI_GENERIC + SND_SEQ_PORT_TYPE_APPLICATION)
Print "Porta del programma = "; s_port
If s_port < 0 Then error.Raise("Errore: " & snd_strerror(s_port))
que = snd_seq_alloc_queue(handle)
If que < 0 Then error.Raise("Errore: " & snd_strerror(que))
Return CStr(id) & ":" & CStr(s_port)
End
Public Procedure ImpostaDispositivo(client As Integer, port As Integer)
dclient = client
dport = port
End
Public Procedure AvvioCoda()
Dim err As Integer
err = snd_seq_control_queue(handle, que, SND_SEQ_EVENT_START, 0, 0)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure ControlChange(flg As Byte, sec As Integer, canale As Byte, prm As Integer, value As Integer)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_CONTROLLER
.flags = flg
.tick_o_tv_sec = sec
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.param = prm
.value = value
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure ProgramChange(flg As Byte, sec As Integer, canale As Byte, non_usato As Byte, value As Integer)
Dim err As Integer
Dim ev_midi As New Snd_seq_event_t
With ev_midi
.type = SND_SEQ_EVENT_PGMCHANGE
.flags = flg
.tick_o_tv_sec = sec
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.value = value
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure NoteON(flg As Byte, sec As Integer, canale As Byte, nota As Byte, vel As Byte)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_NOTEON
.flags = flg
.tick_o_tv_sec = sec
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.note = nota
.velocity = vel
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure NoteOFF(flg As Byte, sec As Integer, canale As Byte, nota As Byte, vel As Byte)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_NOTEOFF
.flags = flg
.tick_o_tv_sec = sec
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.channel = canale
.note = nota
.velocity = vel
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure Flush()
Dim err As Integer
err = snd_seq_drain_output(handle)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure StopCoda()
Dim err As Integer
err = snd_seq_control_queue(handle, que, SND_SEQ_EVENT_STOP, 0, 0)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
snd_seq_close(handle)
End
Esempio in modalità temporizzazione in formato orario usando anche i nanosecondi
Di seguito ostriamo un semplice esempio simile al precedente, ma usando anche il membro ".tv_nsec" della Struttura snd_seq_event_t.
La Classe principale sarà la seguente:
Private Const id_dev As Integer = 128 ' 14 = midi out oppure 128 (solitamente) = softsynth
Private Const p_dev As Integer = 0 ' porta del Client destinatario dei dati Midi: solitamente 0
Public alsa As CAlsa ' Classe che incapsula le funzioni ALSA
Public Sub Form_Open()
With alsa = New CAlsa As "Alsa"
Me.Title = "|| Client ALSA " & .AlsaIni("Programma di prova")
.ImpostaDispositivo(id_dev, p_dev)
End With
End
Public Sub ToggleButton1_Click()
Dim note As Byte[] = [60, 62, 64, 65, 67, 69, 71, 72]
Dim b As Byte
Dim ns As Integer
If ToggleButton1.Value Then
With alsa
.AvvioCoda()
.ControlChange(1, 0, 7, 50)
.ProgramChange(1, 0, 44)
For b = 0 To note.Max
If b == 3 Then ns = 750000000
' Imposta la nota Midi da eseguire.
' Aggiunge 750000000 nanosecondi.
.NoteON(1, b, ns, note[b], 100)
ns = 0
' Imposta la nota Midi da silenziare dall'inizio della "Coda".
' Alla terza nota aggiunge 750000000 nanosecondi.</font>
If b == 2 Then ns = 750000000
.NoteOFF(1, b + 1, ns, note[b], 0)
ns = 0
Next
.Flush()
End With
Else
alsa.StopCoda()
Me.Close
Endif
End
La Classe secondaria per la gestione delle risorse di ALSA:
Private handle As Pointer
Private id As Integer
Private s_port As Integer
Private que As Integer
Private dclient As Byte
Private dport As Byte
Library "libasound:2.0.0"
Private Const SND_SEQ_OPEN_OUTPUT As Integer = 1
Private Const SND_SEQ_PORT_CAP_READ As Integer = 1
Private Const SND_SEQ_PORT_TYPE_MIDI_GENERIC As Integer = 2
Private Const SND_SEQ_PORT_TYPE_APPLICATION As Integer = 1048576
Private Enum SND_SEQ_EVENT_NOTEON = 6, SND_SEQ_EVENT_NOTEOFF, SND_SEQ_EVENT_KEYPRESS,
SND_SEQ_EVENT_CONTROLLER = 10, SND_SEQ_EVENT_PGMCHANGE, SND_SEQ_EVENT_CHANPRESS,
SND_SEQ_EVENT_PITCHBEND, SND_SEQ_EVENT_START = 30, SND_SEQ_EVENT_STOP = 32
' int snd_seq_open (snd_seq_t **seqp, const char * name, int streams, int mode)
' Open the ALSA sequencer.
Private Extern snd_seq_open(seqp As Pointer, name As String, streams As Integer, mode As Integer) As Integer
' int snd_seq_set_client_name (snd_seq_t* seq, const char* name)
' Set client name.
Private Extern snd_seq_set_client_name(seq As Pointer, name As String) As Integer
' int snd_seq_client_id (snd_seq_t * seq)
' Get the client id.
Private Extern snd_seq_client_id(seq As Pointer) As Integer
' int snd_seq_create_simple_port (snd_seq_t* seq, const char* name, unsigned int caps, unsigned int type)
' Creates a port with the given capability and type bits.
Private Extern snd_seq_create_simple_port(seq As Pointer, name As String, caps As Integer, type As Integer) As Integer
' int snd_seq_alloc_queue (snd_seq_t * seq)
' Allocate a queue.
Private Extern snd_seq_alloc_queue(seq As Pointer) As Integer
' int snd_seq_control_queue(snd_seq_t * seq, int q, int type, int value, snd_seq_event_t * ev)
' Queue controls - start/stop/continue.
Private Extern snd_seq_control_queue(seq As Pointer, q As Integer, type As Integer, value As Integer, ev As Pointer) As Integer
' int snd_seq_event_output_buffer (snd_seq_t * seq, snd_seq_event_t *ev)
' Output an event.
Private Extern snd_seq_event_output_buffer(seq As Pointer, ev As Snd_seq_event_t) As Integer
' int snd_seq_drain_output (snd_seq_t * seq)
' Drain output buffer to sequencer.
Private Extern snd_seq_drain_output(seq As Pointer) As Integer
' const char * snd_strerror (int errnum)
' Returns the message for an error code.
Private Extern snd_strerror(errnum As Integer) As String
' int snd_seq_close (snd_seq_t * seq)
' Close the sequencer.
Private Extern snd_seq_close(seq As Pointer) As Integer
Public Function AlsaIni(nome As String) As String
Dim err As Integer
err = snd_seq_open(VarPtr(handle), "default", SND_SEQ_OPEN_OUTPUT, 0)
Print "Apertura del subsistema 'seq' di ALSA = "; IIf(err == 0, "corretta !", "errata !")
If err < 0 Then error.RAISE("Errore: " & snd_strerror(err))
snd_seq_set_client_name(handle, nome)
id = snd_seq_client_id(handle)
Print "Alsa ClientID = "; id
s_port = snd_seq_create_simple_port(handle, "Uscita", SND_SEQ_PORT_CAP_READ, SND_SEQ_PORT_TYPE_MIDI_GENERIC + SND_SEQ_PORT_TYPE_APPLICATION)
Print "Porta del programma = "; s_port
If s_port < 0 Then error.Raise("Errore: " & snd_strerror(s_port))
que = snd_seq_alloc_queue(handle)
If que < 0 Then error.Raise("Errore: " & snd_strerror(que))
Return CStr(id) & ":" & CStr(s_port)
End
Public Procedure ImpostaDispositivo(client As Integer, port As Integer)
dclient = client
dport = port
End
Public Procedure AvvioCoda()
Dim err As Integer
err = snd_seq_control_queue(handle, que, SND_SEQ_EVENT_START, 0, 0)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure ControlChange(flg As Byte, sec As Integer, prm As Integer, value As Integer)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_CONTROLLER
.flags = flg
.tick_o_tv_sec = sec
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.param = prm
.value = value
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure ProgramChange(flg As Byte, sec As Integer, value As Integer)
Dim err As Integer
Dim ev_midi As New Snd_seq_event_t
With ev_midi
.type = SND_SEQ_EVENT_PGMCHANGE
.flags = flg
.tick_o_tv_sec = sec
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.value = value
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure NoteON(flg As Byte, sec As Integer, ns As Integer, nota As Byte, vel As Byte)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_NOTEON
.flags = flg
.tick_o_tv_sec = sec
.tv_nsec = ns
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.note = nota
.velocity = vel
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure NoteOFF(flg As Byte, sec As Integer, ns As Integer, nota As Byte, vel As Byte)
Dim ev_midi As New Snd_seq_event_t
Dim err As Integer
With ev_midi
.type = SND_SEQ_EVENT_NOTEOFF
.flags = flg
.tick_o_tv_sec = sec
.tv_nsec = ns
.queue = que
.source_client = id
.source_port = s_port
.dest_client = dclient
.dest_port = dport
.note = nota
.velocity = vel
End With
err = snd_seq_event_output_buffer(handle, ev_midi)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure Flush()
Dim err As Integer
err = snd_seq_drain_output(handle)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
End
Public Procedure StopCoda()
Dim err As Integer
err = snd_seq_control_queue(handle, que, SND_SEQ_EVENT_STOP, 0, 0)
If err < 0 Then Error.Raise("Errore: " & snd_strerror(err))
snd_seq_close(handle)
End
